Build it square.
Jack
-----Original Message-----
From: shop-talk-bounces@autox.team.net
[mailto:shop-talk-bounces@autox.team.net] On Behalf Of Jim Franklin
Sent: Friday, August 13, 2010 8:48 PM
To: shop-talk List
Subject: [Shop-talk] Construction opinion poll
Having a disagreement with someone and thought I'd solicit opinions.
If you were asked to create a built-in storage cabinet in a floor-to-ceiling
nook, and you knew the nook wasn't square, would you build a square cabinet
and shim it level and use molding to cover the gaps, or literally build it
in
place, knowing the uprights wouldn't be parallel and the shelves (held in
place with columns of holes and shelf pins) probably not level, but there
would be no gaps?
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/jibjib@att.net
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|