shop-talk
[Top] [All Lists]

Re: [Shop-talk] hole sawed 1/4" thick steel post undersized

To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] hole sawed 1/4" thick steel post undersized
From: "John T. Blair" <jblair1948@cox.net>
Date: Mon, 09 Jul 2007 20:55:30 -0400
At 02:16 PM 7/9/2007 -0700, old dirtbeard wrote:
>Well the subject line sort of tells it all.....

>I don't think I can hole saw it again as I would not have a pilot. 

>I am just thinking somebody here has a clever solution for increasing the
>diameter of an undersized hole in a thick piece of steel in a very visible
>location. Thanks in advance...

Doug,

Why not take the saw you used to cut the original hole, and cut a piece of
wood?  This would give you a plug to insert into the hole, and a pilot
hole.  Then you could go in with a slightly bigger hole saw and cut a
larger hole.

John

>
>'72 BSA B50SS
>'74 Triumph TR6
>'01 Harley XLH883
>'03 GMC Cargo Van
>_______________________________________________
>dirtbeard@pacbell.net
>
>Shop-talk mailing list
>
>http://autox.team.net/mailman/listinfo/shop-talk
>
>
>
>best,
>
>shook
>____________________
>'72 BSA B50SS
>'74 Triumph TR6
>'01 HD XHL 883
>'03 GMC Cargo Van
>_______________________________________________
>jblair1948@cox.net
>
>Shop-talk mailing list
>
>http://autox.team.net/mailman/listinfo/shop-talk
>
John T. Blair  WA4OHZ     email:  jblair1948@cox.net
Va. Beach, Va             
Phone:  (757) 495-8229

          48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
     75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                       65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

If you can read this             - Thank a teacher!
If you are reading it in English - Thank a Vet!!
_______________________________________________

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

<Prev in Thread] Current Thread [Next in Thread>