shop-talk
[Top] [All Lists]

Re: [Shop-talk] hole sawed 1/4" thick steel post undersized

To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] hole sawed 1/4" thick steel post undersized
From: "John T. Blair" <jblair1948@cox.net>
Date: Mon, 09 Jul 2007 21:10:48 -0400
At 08:57 PM 7/9/2007 -0400, Steven Trovato wrote:

>When you figure in the thickness of the saw blade, the plug will be 
>too small.  It will drop right into the hole.

That can be fixed with a piece of flashing or some type of ears.  But
you could stick it on the end of the larger hole saw and slide it into
the hole for support and a guide.

John


John T. Blair  WA4OHZ     email:  jblair1948@cox.net
Va. Beach, Va             
Phone:  (757) 495-8229

          48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
     75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                       65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

If you can read this             - Thank a teacher!
If you are reading it in English - Thank a Vet!!
_______________________________________________

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

<Prev in Thread] Current Thread [Next in Thread>