shop-talk
[Top] [All Lists]

Re: [Shop-talk] hole sawed 1/4" thick steel post undersized

To: "old dirtbeard" <dirtbeard@pacbell.net>, <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] hole sawed 1/4" thick steel post undersized
From: "Eric J Russell" <ejrussell@mebtel.net>
Date: Sun, 8 Jul 2007 19:16:09 -0500
Can you put an access hole in the back side and then put a cover plate 
over that?

Eric Russell
STOC #2860
Mebane, NC
http://home.mebtel.net/~ejrussell

----- Original Message ----- 
>
> Well it is big enough for the switch, but not the nut that holds it 
> in (they
> were assuming access to the back of he plate, but this is a blind 
> location). I
> have a face plate that will hold it to the post.
_______________________________________________

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

<Prev in Thread] Current Thread [Next in Thread>