I used old hockey pucks between the floor and the
steel feet of the compressor. Cheap isolation.
Steve
-----Original Message-----
From: Scott Whitehead <swhiteh3@mediaone.net>
To: nogera@juno.com <nogera@juno.com>
Cc: shop-talk@autox.team.net <shop-talk@autox.team.net>
Date: Monday, March 15, 1999 9:20 PM
Subject: Re: Bolting Compressor to the floor
>
>Pour the floor first, then drill holes with a masonry bit.
>Then bolt it down with masonry bolts. Done.
>
>nogera@juno.com wrote:
>>
>> I'm getting ready to pour a concrete slab behind the garage for a little
>> shed to house my compressor . Anyone got some good ideas on bolting
>> the compressor to the floor? My first thought was to imbed some studs
>> in the concrete when wet but that means 1. being spot on with the
>> placement and 2. lifting that 600 lbs(+) compressor to clear the studs.
>> Would making a wood base which bolts to the compressor feet and to the
>> floor work ?
>> Bob Nogueira
>
|