mg-t
[Top] [All Lists]

RE: Oil Leak

To: "'Stuart Keen'" <simbafish@home.com>
Subject: RE: Oil Leak
From: "Lew Palmer" <lpalmer@mn.mediaone.net>
Date: Sat, 16 Dec 2000 09:45:45 -0600
Stu,

I have the box in which the rope seal was packaged.

The large number stamped on the flap of the box is JV730. That's probably
the NAPA part number. There is also a sticker with a UPC code. That number
is:
        7  57522  41137  0

Hopefully, someone at NAPA can trace it by one of those.

Regards,
Lew Palmer

-----Original Message-----
From: Stuart Keen [mailto:simbafish@home.com]
Sent: Friday, December 15, 2000 8:57 PM
To: lpalmer@mn.mediaone.net
Subject: Re: Oil Leak


Lew,

If you have the NAPA number for the front oil seal handy, please pass it
along. I have a local NAPA store so could get the seal tomorrow, rather
than from Moss.


Thanks for your reply. It has given this layman an insight on what
should be done.

Stu

<Prev in Thread] Current Thread [Next in Thread>