I tried them, but they didn't want to talk. They sent me to K&S
Engineering.
Lew
-----Original Message-----
From: Gerry Weber [mailto:webarch@easyon.com]
Sent: Tuesday, January 15, 2002 7:44 AM
To: Lew Palmer; DSBonar@aol.com
Cc: mg-mmm@autox.team.net
Subject: Re: PA parts
Lew and group
I purchased 5/32" brass tube from:
Lewis Brass and Copper
69-61 78th Street
PO Box 67
Middle Village, NY 11379
718-894-1442, Fax 718-326-4032
Tom Metcalf cut to length and soldered/brazed the old fittings to the
tube,
then annealed.
Tube comes in 12' lengths. Size is 5/32" x .032 x 12'.
Tell them you want to set up a cash account and pay by credit card.
Good luck
Gerry Weber, PA 0297, SA1881
----- Original Message -----
From: "Lew Palmer" <lpalmer@mn.mediaone.net>
To: <DSBonar@aol.com>
Cc: <mg-mmm@autox.team.net>
Sent: Saturday, January 12, 2002 11:22 AM
Subject: RE: PA parts
> Other items, I just do a search on the internet. For example, I just
> found a source for the 5/32" thick wall brass pipes for the central
> lubrication system. Unfortunately, they don't want to sell to me. They
> want me to go through their customer "K & S Engineering". These are
the
> folks whose stuff you see in all the hobby shops.
>
> Regards,
> Lew Palmer
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|