datsun-roadsters
[Top] [All Lists]

Re: 1600 Head

To: Marko Lahtinen <lahtinen_marko@yahoo.com.au>
Subject: Re: 1600 Head
From: Vicki Burrows <gregnvicki@earthlink.net>
Date: Thu, 21 Nov 2002 18:11:08 -0800
Stuck chokes too... the pipe tends to stay down...
Greg

Marko Lahtinen wrote:

> My view as well, check the carbs.  My car had this
> problem , due to front carb being shot.  new needles
> fixed it to a degree, I still have problem at idle
> only and will be replacing the needles to fix.
>
> Marko
> 64 1500 with R16
>
> ------------------------------
>
> Date: Wed, 20 Nov 2002 22:13:06 EST
> From: Keith0alan@aol.com
> Subject: Re: 1600 Head
>
> Hello,
>
>        Is the black splatter raw gas? Cold with the
> choke on they normally do that. If yours is doing so
> after the engine is warmed up then your carbs are
> way too rich. That would also account for the lack of
> power. Check the carbs first.
>
>                                                  keith
> williams
>
> > I'm at a loss as to what else to search under in the
> archieves.  I've tried > head, thickness, cylinder,
> surface, surfaced, decked, height, valves, > seats,
> > seals, mill and milled.>
> > The three main has some black splatter out the tail
> pipe and does not seem  to have the power my 5 main
> has, so I'm thinking about a rebuild top and bottom.

///  datsun-roadsters@autox.team.net mailing list
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>