I'm not sure the filter you are using but if it is a fram I would start by
changing it to a wix or napa filter first. I'm not sure if there is a bypass
in the remote housing but if there is it should be eliminated as that may be
your issue. first and easiest check is the filter!
On 8/29/2009 7:36:07 PM, Greg Schroeder (gschroeder@comcast.net) wrote:
> I had an issue with the oil pressure gauge when I was getting ready to
> leave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|