alpines
[Top] [All Lists]

Re: [Alpines] Dual webers

To: alpines <alpines@autox.team.net>
Subject: Re: [Alpines] Dual webers
From: Mary and Ron Tebo <mrtebo@shaw.ca>
Date: Wed, 25 Feb 2009 09:23:11 -0700
Allan:

My archive picture IS the Tom hill picture, so I can now give him the 
credit. Thanks Tom!

Ron Tebo

Allan Ballard wrote:
> Hi Ron,
>
> I would appreciate a copy.
>
> Thanks!
>
> Allan Ballard 
>
> -----Original Message-----
> From: alpines-bounces@autox.team.net [mailto:alpines-bounces@autox.team.net]
> On Behalf Of Mary and Ron Tebo
> Sent: Wednesday, February 25, 2009 8:43 AM
> To: alpines
> Subject: Re: [Alpines] Dual webers
>
> Lauri:
>
> Here is a picture from my archive. I usually am careful to note the source,
> but I slipped up this time. Since I can't send it on the list, I will send
> it offlist to anyone else that wants it.
>
> Ron Tebo
>
> ?auri Lehtinen wrote:
>   
>> Hello, folks,
>> has anyone a photo of a Holbay manifold for dual webers?
>> Is it bent so that carbs rise a bit higher?
>> And how brake master cylinder is arranged?
>>
>> Lauri
>>
>> ?auri Lehtinen
>> toimittaja, insinoori
>> Asemapaallikonkatu 12B
>> Helsinki, Finland
>> +358 (0) 400 851988
>>
>>
>>
>>
>>
>>
>> Spyware Doctor-ohjelma on tarkistanut sdhkvpostiviestit (6.0.0.386)
>> Tietokantaversio: 5.11840
>> http://www.pctools.com/fi/spyware-doctor-antivirus/
>> _______________________________________________
>> Support Team.Net  http://www.team.net/donate.html
>>
>> Alpines@autox.team.net
>> http://autox.team.net/mailman/listinfo/alpines
>>
>> http://www.team.net/archive
>>     
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> Alpines@autox.team.net
> http://autox.team.net/mailman/listinfo/alpines
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Alpines@autox.team.net
http://autox.team.net/mailman/listinfo/alpines

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>