Stan,
Thank you very much -- the Oberg sling looks like a great addition. I looked to
see if there are different models of it, but in Moss they show the same one for
all models. I see this one for less money, but don't know if it is the same
model:
http://www.primetimesolutions.com/Automotive/Other-Auto-Solutions/Oberg-Tilt-Lift-Engine-Sling?cid=77&leadsource=PF107&cvsfa=495&cvsfe=2&cvsfp=TILT01
Any ideas if it is the same sling?
Thanks for the great photos, too..
best,
doug
"Foster, Stan" <stan.foster@hp.com> wrote: If I have the engine and tranny out
I would always install them together. It is just so much easier than trying to
install separately.
I used a 2 ton crane and an Oberg tilt lift and had a helper to aid with
steering the unit back into the engine bay but it went back in very smoothly. I
recommend the step ladder to reach the tilt lift bar unless you are 6ft 6
inches tall or greater and the slippers make it an overall comfortable
experience :-)
http://i38.photobucket.com/albums/e119/foster461/Winter%202008%20Projects/DSC_0004-1.jpg
The crane provides both up and down and fwd/back mobility, I have no experience
using a beam for this project but I know at least one person that has this
setup who will probably chime in shortly.
Stan
-----Original Message-----
From: 6pack-bounces+stan.foster=hp.com@autox.team.net
[mailto:6pack-bounces+stan.foster=hp.com@autox.team.net] On Behalf Of old
dirtbeard
Sent: Monday, August 04, 2008 4:07 PM
To: 6pack@autox.team.net
Subject: [6pack] reinstalling TR6 engine and transmission
Hi guys,
I know this has to have been discussed previously, but I am interested in
experiences reinstalling a TR6 engine and transmission as a unit as compared to
individually. I removed them separately and used a floor engine hoist to remove
the engine.
I don't know if I would have tried this with the floor hoist, but I now have a
10' high steel I-beam with a 2-ton trolley and chain hoist in my garage (along
with the floor hoist).
It would seem to be easier to assemble the engine and transmission prior to
installation, but maybe it is very hard steering the "long lump" home.
Any experiences/opinions/advice would be appreciated. Thank you.
best,
doug
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|
