Vance,
I had a similar problem I addressed to the list a while ago. Dick's (
Taylor , of course) response solved my problem. He suggested slightly
opening or tightening the gap on my points . My points were set to the
factory spec .015 ,but opening them up slightly solved the problem. I
can't set by dwell because the MSD handles that but the points trigger
the MSD. Try setting them tighter or open'em up a little & see if it
makes a differance.
--
Mitch Seff
Oceanside, N.Y.
75 TR6 SC
http://www.triumphowners.com/384
|