- 1. Installing Valve seals on a TR6 - logistics (score: 1)
- Author: Unknown
- Date: Thu, 4 Apr 2002 10:32:46 -0800 (PST)
- So I m close to attempting to put valve seals on my 1970 TR6. I know that it is really just a band-aid until I get around to rebuilding a head and putting in a new cam. (Anyone got a spare head they
- /html/triumphs/2002-04/msg00165.html (8,208 bytes)
- 2. RE: Installing Valve seals on a TR6 - logistics (score: 1)
- Author: Unknown
- Date: Thu, 4 Apr 2002 11:03:08 -0800
- Scott : I've done exactly this to my TR3A. Yes, it's a problem, most of my valve keepers were stuck tightly enough that the air pressure wouldn't hold the valves. I solved the problem by putting a s
- /html/triumphs/2002-04/msg00166.html (8,996 bytes)
- 3. RE: Installing Valve seals on a TR6 - logistics (score: 1)
- Author: Unknown
- Date: Thu, 4 Apr 2002 13:59:30 -0700
- Last summer I had a broken intake and exhaust springs on two different cylinders n my TR6. I did exactly what you did and It worked great. I think it will be easy for you as long as the Air compress
- /html/triumphs/2002-04/msg00168.html (8,997 bytes)
- 4. Re: Installing Valve seals on a TR6 - logistics (score: 1)
- Author: Unknown
- Date: Thu, 4 Apr 2002 17:53:08 -0500
- Read something interresting in my son's Hayne's for his Saturn - - Feed some soft rope into the cylinder via the plug hole when the piston is down, just starting the compression stroke. Then manually
- /html/triumphs/2002-04/msg00174.html (9,278 bytes)
- 5. Re: Installing Valve seals on a TR6 - logistics (score: 1)
- Author: Unknown
- Date: Thu, 4 Apr 2002 20:44:36 -0500
- It says to use nylon rope. Got it here. It says "Position the the piston at a point approximately 45 degrees before TDC on the compression stroke, then feed in a long piece of nylon rope through the
- /html/triumphs/2002-04/msg00177.html (11,445 bytes)
- 6. Re: Installing Valve seals on a TR6 - logistics (score: 1)
- Author: Unknown
- Date: Sun, 14 Apr 2002 07:36:53 -0700 (PDT)
- Just thought I'd share my continued experience on this topic: I was all excited about installing the valve seals this weekend after the parts came in at the local NAPA store. I bought rubber seals wi
- /html/triumphs/2002-04/msg00620.html (10,971 bytes)
- 7. Re: Installing Valve seals on a TR6 - logistics (score: 1)
- Author: Unknown
- Date: Mon, 15 Apr 2002 11:39:23 -0500
- You need to machine the top of the valve guides to a smaller diameter, then you can use smaller seals that fit inside your inner springs. Goodson (http://www.goodson.com) sells the cutting tool you n
- /html/triumphs/2002-04/msg00660.html (7,752 bytes)
This search system is powered by
Namazu