Re: [TR] TR6 manifold gasket

triumphs

Re: [TR] TR6 manifold gasket

To:	<jimmuller@rcn.com>, <triumphs@autox.team.net>
Subject:	Re: [TR] TR6 manifold gasket
From:	"Michael Marr" <mmarr@notwires.com>
Date:	Fri, 22 Dec 2006 16:52:06 -0600

.  Or you could hold the stud with vice grips, using lots of padding to 
avoid further damage to the threads.  Or you could go buy a new stud.
> --
> Jim Muller
>
Or you could change the stud oil to synthetic...

Merry Christmas to all!!

Michael Marr
1960TR3A
Plainfield, IL 


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TR] TR6 manifold gasket, Tom Note Re: [TR] TR6 manifold gasket, Mark J. Bradakis Re: [TR] TR6 manifold gasket, tom white Re: [TR] TR6 manifold gasket, levilevi Re: Re: [TR] TR6 manifold gasket, Tom Note [TR] TR6 manifold gasket, Paul Mitchell Re: [TR] TR6 manifold gasket, Dave1massey Re: [TR] TR6 manifold gasket, jimmuller Re: [TR] TR6 manifold gasket, Michael Marr <= RE: [TR] TR6 manifold gasket, Bob Danielson

Previous by Date:	RE: [TR] Temp Gauge Needed, Randall
Next by Date:	RE: [TR] TR6 manifold gasket, Bob Danielson
Previous by Thread:	Re: [TR] TR6 manifold gasket, jimmuller
Next by Thread:	RE: [TR] TR6 manifold gasket, Bob Danielson
Indexes:	[Date] [Thread] [Top] [All Lists]