http://www.team.net/www/healey/tech/big_hly/od/finespanner.html
Carl
-----Original Message-----
From: fogbro1 [mailto:fogbro1@bellatlantic.net]
Sent: Monday, June 05, 2000 9:11 PM
To: James A. Ruffner
Cc: Michael Ferguson; triumphs@autox.team.net
Subject: Re: A-Type OD Question
Jim,
I humbly suggest that you might be leading Michael in the wrong
direction here. He should set the valve by determining that the ball
valve lifts between 1/32 and 1/16 inch with the solenoid on. Setting by
aligning the hole in the lever with the hole in the case is bad news.
Suggest you take a look at "Mr. Finespanner" on the Austin Healey site.
The set up is reviewed in detail there. Someone got the web address??
Ed Woods
|