triumphs
[Top] [All Lists]

Re: Removing Transmission tail housing (TR4)

To: "Brian Sanborn" <sanborn@net1plus.com>, Triumph List <triumphs@autox.team.net> charset=ISO-8859-1
Subject: Re: Removing Transmission tail housing (TR4)
From: Tony Rhodes <ARhodes@compuserve.com>
Date: Mon, 5 Jul 1999 13:07:33 -0400
Message text written by "Brian Sanborn"
>Good luck.... just be methodical, keep clear notes and pictures and keep
very close attention to the Haynes instructions<

Thanks.

I will get a brass head hammer (have to figure out where!)
Could not find a puller with more than 8" draw.  This needs about 10+ inches.

I have a big rubber mallet, and will try that on the wings.  Just does
not seem to want to move after the first 3/8"

I plan on meing very methodical too, hopefully.

-Tony

<Prev in Thread] Current Thread [Next in Thread>