What can I use under the chrome ring to
seal the gauge?
Paul,
I rebuilt my entire dash including the gauges and faced this
same problem. The old material was rubber or cork based but
was a crumbly powder on my gauges.
I talked to the guys at Nisonger in Mamaroneck, NY.(
http://www.nisonger.com) They specialize in guage rebuilding
and supplied me with the o-rings for the outside of the
gauges and lengths of a hollow vinyl tubing that was used to
form the seal between the bezel and glass.
If you can find a flexible small diameter tubing you could
use that. I could not locate it anywhere.
Brian Sanborn
62 TR4 CT16260L Groton,MA
sanborn@net1plus.com
------------------------
|