--===============6047376497321636481==
boundary="----=_Part_671246_1330113000.1622220616553"
------=_Part_671246_1330113000.1622220616553
Content-Transfer-Encoding: quoted-printable
This whole discussion is part of the reason why I went to an annular throwo=
ut bearing on my car a number of years ago. The other reason was I just did=
n't like the affect all the external slave/arm geometry creates. I've been =
very happy with the change.=C2=A0
-----Original Message-----
From: Ron Fraser via Tigers <tigers@autox.team.net>
To: 'Gary' <garywinblad@comcast.net>; tigers@autox.team.net
Sent: Fri, May 28, 2021 8:50 am
Subject: Re: [Tigers] Clutch issue
#yiv4255645540 #yiv4255645540 -- _filtered {} _filtered {} _filtered {}#yiv=
4255645540 #yiv4255645540 p.yiv4255645540MsoNormal, #yiv4255645540 li.yiv42=
55645540MsoNormal, #yiv4255645540 div.yiv4255645540MsoNormal {margin:0in;ma=
rgin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv4255645540=
a:link, #yiv4255645540 span.yiv4255645540MsoHyperlink {color:blue;text-dec=
oration:underline;}#yiv4255645540 pre {margin:0in;margin-bottom:.0001pt;fon=
t-size:10.0pt;}#yiv4255645540 span.yiv4255645540HTMLPreformattedChar {font-=
family:Consolas;}#yiv4255645540 span.yiv4255645540EmailStyle21 {font-family=
:sans-serif;color:windowtext;}#yiv4255645540 .yiv4255645540MsoChpDefault {f=
ont-size:10.0pt;} _filtered {}#yiv4255645540 div.yiv4255645540WordSection1 =
{}#yiv4255645540=20
Gary
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0 My point here is that if you drop the clutch rod you=E2=80=
=99re not going anywhere.
=C2=A0
Your spring with the stock clip is excellent but what if something unexpect=
ed happens.
Rust happens, road debris happens, cylinder rubber seals degrade happens, m=
any things can happen out on the road.
=C2=A0
Call it safety wire or tether wire, I want to make sure not matter what the=
clutch rod is not lost and I have to be towed.
Safety wire is usually stainless steel so it should not rust and it is just=
there with no tension or flexing, its just along for the ride until its ne=
eded.
=C2=A0
Ron Fraser
=C2=A0
=C2=A0
From: Tigers <tigers-bounces@autox.team.net> On Behalf Of Gary
Sent: Friday, May 28, 2021 10:10 AM
To: tigers@autox.team.net
Subject: Re: [Tigers] Clutch issue
=C2=A0
I've never heard of safety wire but if you have the stock clip to hold the =
rod to the clutch arm,
and you add a return spring to the clutch arm, there isn't much of a way fo=
r it to fall out.
And you will get max stroke and save the throwout bearing.
Gary
On 5/28/2021 5:19 AM, Ron Fraser wrote:
Jerry
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0 I always recommend that everyone should put safety wire on =
the clutch rod =E2=80=93 just in case the rod gets into a position it could=
fall.
=C2=A0
If the clutch rod falls out your basically a tow it away car.
I think I have a safety wire on the clutch rod to the clutch fork; this sho=
uld prevent the rod from ever totally leaving the car.=20
=C2=A0
Ron Fraser
=C2=A0
From: Tigers <tigers-bounces@autox.team.net> On Behalf Of Jerry Christopher=
son
Sent: Friday, May 28, 2021 12:03 AM
To: Tiger Autox <TIGERS@AUTOX.TEAM.NET>
Subject: [Tigers] Clutch issue
=C2=A0
Thanks for the ideas from all of you.=C2=A0 The issue of a longer push rod =
(which I have, 4.5 inches) is that you can only go up against the throw out=
bearing just so far.=C2=A0 Right now I=E2=80=99m touching the bearing (whi=
ch I don=E2=80=99t want of course).=C2=A0 Today I received my order from S.=
S. (new kits for the master and slave) and it seems to have improved the is=
sue, I=E2=80=99ll try driving the car tomorrow to see if it=E2=80=99s livab=
le. I let someone talk me into a =C2=A0RAM clutch, should have gone with a =
Centerforce maybe?=C2=A0 Rick from S. S. said people have had good luck wit=
h them. =C2=A0=C2=A0I=E2=80=99m now of the feeling if you aren=E2=80=99t ra=
cing, a standard Mustang clutch is more than enough for the Tiger. =C2=A0Th=
e idea of a higher volume (larger dia.) master also suggested by Rick, is t=
hat it will make the peddle force higher.=C2=A0 Another issue is how far ca=
n one allow the slave=C2=A0 piston to travel without coming out of the cyli=
nder (mine does not have the retaining clip like it shoes in the manual).=
=C2=A0 Mine has a max movement of around 1.350, The piston could come out a=
nother .300 ,but that would have the front of the piston .300 past the end =
of the cylinder, probably not a good thing!
Thanks again for your responses!=C2=A0 Jerry
_______________________________________________ =C2=A0tigers@autox.team.net=
=C2=A0Donate: http://www.team.net/donate.htmlArchive: http://www.team.net/=
pipermail/tigers http://autox.team.net/archive =C2=A0Unsubscribe: http://au=
tox.team.net/mailman/options/tigers/garywinblad@comcast.net =C2=A0 =C2=A0
=C2=A0
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mwood24020@aol.co=
m
------=_Part_671246_1330113000.1622220616553
Content-Transfer-Encoding: quoted-printable
<div style=3D"font-size:10pt;font-family:arial,helvetica,sans-serif;color:b=
lack;"><div style=3D"font-family:arial,helvetica,sans-serif;font-size:10pt;=
color:black;">This whole discussion is part of the reason why I went to an =
annular throwout bearing on my car a number of years ago. The other reason =
was I just didn't like the affect all the external slave/arm geometry creat=
es. I've been very happy with the change. <br><br><br>-----Original Me=
ssage-----<br>From: Ron Fraser via Tigers <tigers@autox.team.net><br>=
To: 'Gary' <garywinblad@comcast.net>; tigers@autox.team.net<br>Sent: =
Fri, May 28, 2021 8:50 am<br>Subject: Re: [Tigers] Clutch issue<br><br></di=
v><div id=3D"yiv4255645540"><style>#yiv4255645540 #yiv4255645540 --
=20
_filtered {}
_filtered {}
_filtered {}
#yiv4255645540 =20
#yiv4255645540 p.yiv4255645540MsoNormal, #yiv4255645540 li.yiv4255645540Mso=
Normal, #yiv4255645540 div.yiv4255645540MsoNormal
=09{margin:0in;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-seri=
f;}
#yiv4255645540 a:link, #yiv4255645540 span.yiv4255645540MsoHyperlink
=09{color:blue;text-decoration:underline;}
#yiv4255645540 pre
=09{margin:0in;margin-bottom:.0001pt;font-size:10.0pt;}
#yiv4255645540 span.yiv4255645540HTMLPreformattedChar
=09{font-family:Consolas;}
#yiv4255645540 span.yiv4255645540EmailStyle21
=09{font-family:sans-serif;color:windowtext;}
#yiv4255645540 .yiv4255645540MsoChpDefault
=09{font-size:10.0pt;}
_filtered {}
#yiv4255645540 div.yiv4255645540WordSection1
=09{}
#yiv4255645540 </style><div><div class=3D"yiv4255645540WordSection1"><p cla=
ss=3D"yiv4255645540MsoNormal">Gary</p><p class=3D"yiv4255645540MsoNormal">&=
nbsp; &nbs=
p; My point here is that if you drop the clutch rod you=E2=80=
=99re not going anywhere.</p><p class=3D"yiv4255645540MsoNormal"> </p=
><p class=3D"yiv4255645540MsoNormal">Your spring with the stock clip is exc=
ellent but what if something unexpected happens.</p><p class=3D"yiv42556455=
40MsoNormal">Rust happens, road debris happens, cylinder rubber seals degra=
de happens, many things can happen out on the road.</p><p class=3D"yiv42556=
45540MsoNormal"> </p><p class=3D"yiv4255645540MsoNormal">Call it safe=
ty wire or tether wire, I want to make sure not matter what the clutch rod =
is not lost and I have to be towed.</p><p class=3D"yiv4255645540MsoNormal">=
Safety wire is usually stainless steel so it should not rust and it is just=
there with no tension or flexing, its just along for the ride until its ne=
eded.</p><p class=3D"yiv4255645540MsoNormal"> </p><p class=3D"yiv4255=
645540MsoNormal">Ron Fraser</p><p class=3D"yiv4255645540MsoNormal"> <=
/p><p class=3D"yiv4255645540MsoNormal"> </p><div class=3D"yiv42556455=
40yqt3361986894" id=3D"yiv4255645540yqt93097"><div><div style=3D"border:non=
e;border-top:solid #E1E1E1 1.0pt;padding:3.0pt 0in 0in 0in;"><p class=3D"yi=
v4255645540MsoNormal"><b>From:</b> Tigers <tigers-bounces@autox.team.net=
> <b>On Behalf Of </b>Gary<br clear=3D"none"><b>Sent:</b> Friday, May 28=
, 2021 10:10 AM<br clear=3D"none"><b>To:</b> tigers@autox.team.net<br clear=
=3D"none"><b>Subject:</b> Re: [Tigers] Clutch issue</p></div></div><p class=
=3D"yiv4255645540MsoNormal"> </p><p class=3D"yiv4255645540MsoNormal" =
style=3D"margin-bottom:12.0pt;">I've never heard of safety wire but if you =
have the stock clip to hold the rod to the clutch arm,<br clear=3D"none">an=
d you add a return spring to the clutch arm, there isn't much of a way for =
it to fall out.<br clear=3D"none">And you will get max stroke and save the =
throwout bearing.<br clear=3D"none">Gary<br clear=3D"none"><br clear=3D"non=
e"></p><div><p class=3D"yiv4255645540MsoNormal">On 5/28/2021 5:19 AM, Ron F=
raser wrote:</p></div><blockquote style=3D"margin-top:5.0pt;margin-bottom:5=
.0pt;"><p class=3D"yiv4255645540MsoNormal">Jerry</p><p class=3D"yiv42556455=
40MsoNormal"> &n=
bsp; I always recommend that everyone should put sa=
fety wire on the clutch rod =E2=80=93 just in case the rod gets into a posi=
tion it could fall.</p><p class=3D"yiv4255645540MsoNormal"> </p><p cla=
ss=3D"yiv4255645540MsoNormal">If the clutch rod falls out your basically a =
tow it away car.</p><p class=3D"yiv4255645540MsoNormal">I think I have a sa=
fety wire on the clutch rod to the clutch fork; this should prevent the rod=
from ever totally leaving the car. </p><p class=3D"yiv4255645540MsoNormal"=
> </p><p class=3D"yiv4255645540MsoNormal">Ron Fraser</p><p class=3D"yi=
v4255645540MsoNormal"> </p><div><div style=3D"border:none;border-top:s=
olid #E1E1E1 1.0pt;padding:3.0pt 0in 0in 0in;"><p class=3D"yiv4255645540Mso=
Normal"><b>From:</b> Tigers <a rel=3D"nofollow noopener noreferrer" shape=
=3D"rect" ymailto=3D"mailto:tigers-bounces@autox.team.net"; target=3D"_blank=
" href=3D"mailto:tigers-bounces@autox.team.net";><tigers-bounces@autox.te=
am.net></a> <b>On Behalf Of </b>Jerry Christopherson<br clear=3D"none"><=
b>Sent:</b> Friday, May 28, 2021 12:03 AM<br clear=3D"none"><b>To:</b> Tige=
r Autox <a rel=3D"nofollow noopener noreferrer" shape=3D"rect" ymailto=3D"m=
ailto:TIGERS@AUTOX.TEAM.NET" target=3D"_blank" href=3D"mailto:TIGERS@AUTOX.=
TEAM.NET"><TIGERS@AUTOX.TEAM.NET></a><br clear=3D"none"><b>Subject:</=
b> [Tigers] Clutch issue</p></div></div><p class=3D"yiv4255645540MsoNormal"=
> </p><p class=3D"yiv4255645540MsoNormal"><span style=3D"font-size:14.=
0pt;font-family:sans-serif;">Thanks for the ideas from all of you. Th=
e issue of a longer push rod (which I have, 4.5 inches) is that you can onl=
y go up against the throw out bearing just so far. Right now I=E2=80=
=99m touching the bearing (which I don=E2=80=99t want of course). Tod=
ay I received my order from S.S. (new kits for the master and slave) and it=
seems to have improved the issue, I=E2=80=99ll try driving the car tomorro=
w to see if it=E2=80=99s livable. I let someone talk me into a RAM cl=
utch, should have gone with a Centerforce maybe? Rick from S. S. said=
people have had good luck with them. I=E2=80=99m now of the fe=
eling if you aren=E2=80=99t racing, a standard Mustang clutch is more than =
enough for the Tiger. The idea of a higher volume (larger dia.) maste=
r also suggested by Rick, is that it will make the peddle force higher.&nbs=
p; Another issue is how far can one allow the slave piston to travel =
without coming out of the cylinder (mine does not have the retaining clip l=
ike it shoes in the manual). Mine has a max movement of around 1.350,=
The piston could come out another .300 ,but that would have the front of t=
he piston .300 past the end of the cylinder, probably not a good thing!</sp=
an></p><p class=3D"yiv4255645540MsoNormal"><span style=3D"font-size:14.0pt;=
font-family:sans-serif;">Thanks again for your responses! Jerry</span=
></p><p class=3D"yiv4255645540MsoNormal"><br clear=3D"none"><br clear=3D"no=
ne"></p><pre>_______________________________________________</pre><pre> &nb=
sp;</pre><pre><a rel=3D"nofollow noopener noreferrer" shape=3D"rect" ymailt=
o=3D"mailto:tigers@autox.team.net"; target=3D"_blank" href=3D"mailto:tigers@=
autox.team.net">tigers@autox.team.net</a></pre><pre> </pre><pre>Donat=
e: <a rel=3D"nofollow noopener noreferrer" shape=3D"rect" target=3D"_blank"=
href=3D"http://www.team.net/donate.html";>http://www.team.net/donate.html</=
a></pre><pre>Archive: <a rel=3D"nofollow noopener noreferrer" shape=3D"rect=
" target=3D"_blank" href=3D"http://www.team.net/pipermail/tigers";>http://ww=
w.team.net/pipermail/tigers</a> <a rel=3D"nofollow noopener noreferrer" sha=
pe=3D"rect" target=3D"_blank" href=3D"http://autox.team.net/archive";>http:/=
/autox.team.net/archive</a></pre><pre> </pre><pre>Unsubscribe: <a rel=
=3D"nofollow noopener noreferrer" shape=3D"rect" target=3D"_blank" href=3D"=
http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net";>http:=
//autox.team.net/mailman/options/tigers/garywinblad@comcast.net</a></pre><p=
re> </pre><pre> </pre></blockquote></div><p class=3D"yiv4255645=
540MsoNormal"> </p></div></div></div><div class=3D"yqt3361986894" id=
=3D"yqt73786">_______________________________________________<br clear=3D"n=
one"><br clear=3D"none"><a shape=3D"rect" ymailto=3D"mailto:tigers@autox.te=
am.net" href=3D"mailto:tigers@autox.team.net";>tigers@autox.team.net</a><br =
clear=3D"none"><br clear=3D"none">Donate: <a shape=3D"rect" href=3D"http://=
www.team.net/donate.html" target=3D"_blank">http://www.team.net/donate.html=
</a><br clear=3D"none">Archive: <a shape=3D"rect" href=3D"http://www.team.n=
et/pipermail/tigers" target=3D"_blank">http://www.team.net/pipermail/tigers=
</a><a shape=3D"rect" href=3D"http://autox.team.net/archive"; target=3D"_bl=
ank">http://autox.team.net/archive</a><br clear=3D"none"><br clear=3D"none"=
>Unsubscribe: <a shape=3D"rect" href=3D"http://autox.team.net/mailman/optio=
ns/tigers/mwood24020@aol.com" target=3D"_blank">http://autox.team.net/mailm=
an/options/tigers/mwood24020@aol.com</a><br clear=3D"none"><br clear=3D"non=
e"><br clear=3D"none"></div></div>
------=_Part_671246_1330113000.1622220616553--
--===============6047376497321636481==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
--===============6047376497321636481==--
|