Hmmm. Certainly the O'scope would give the definitive answer. Good luck.
Donald.
> Date: Sat, 06 Jan 2001 21:00:41 -0800
> From: Alan Lemen <alemen@ftconnect.com>
>
>
> Donald I have a feeling that since I can see the changes with the DVM
> but the reading on the gauges are low the duty cycle is out. Maybe its
> sticky contacts like a relay. Again an oscilloscope would show it
> perfectly.
>
> Alan
>
> Donald H Locker wrote:
> >
> > Hi, Alan.
> >
> > The voltage stabiliser is actually a [slow-speed electromechanical
> > with very little damping] switch-mode regulator. So a DVM will show
[BIGGG snip]
|