On Mon, Oct 25, 2010 at 9:11 PM, John Niolon <jniolon@bham.rr.com> wrote:
> I've got a number of 2" ratchet straps that all have flat strap ends.
B They
> work well on trailers with a bar stock rail or angle iron... but don't do
> diddley on d-rings or round stock... B too much invested in the straps to
scrap
> them and start over
>
> I've found a 'wire hook' that will hook in the flat strap ends and give you
a
> hook that will work on the d-rings... but everyone that sells them wants
case
> quantity orders... at 5 bucks a piece 25-30 to a box that's not in the
> budget... I only need 4 -6 of these total... guess I could fab some up but
> looking for a supplier of small quantities...
>
Buy some straps with them already attached. They're not terribly expensive.
http://www.talcospecialties.com/Winch-Strap-2-inch.aspx
--
David Scheidt
dmscheidt@gmail.com
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|