I use binder clips designed to hold a stack of papers together. I run
the "excess" around a trailer rail then clamp the end back on the
strapAvailable in sizes up to 2 inches. The 2 ones come 12 to a box
for around $5.
On Mon, Oct 25, 2010 at 10:16 PM, Greg Gelhar <firstname.lastname@example.org> wrote:
> A quick look in the McMaster-Carr catalog shows a matching hook for 2" wide
> webbing. Their part # 3648T83 shown at $2.79 ea.
> Greg Gelhar
> Osseo, MN
>> [Original Message]
>> From: John Niolon <email@example.com>
>> To: shop-talk <firstname.lastname@example.org>
>> Date: 10/25/2010 8:10:50 PM
>> Subject: [Shop-talk] wire hooks for ratchet straps
>> I've got a number of 2" ratchet straps that all have flat strap ends.
>> work well on trailers with a bar stock rail or angle iron... but don't do
>> diddley on d-rings or round stock... B too much invested in the straps to
>> them and start over
>> I've found a 'wire hook' that will hook in the flat strap ends and give
> you a
>> hook that will work on the d-rings... but everyone that sells them wants
>> quantity orders... at 5 bucks a piece 25-30 to a box that's not in the
>> budget... I only need 4 -6 of these total... guess I could fab some up but
>> looking for a supplier of small quantities...
>> here's what they look like..... any help out there
> Donate: http://www.team.net/donate.html
> Suggested annual donation B $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
Suggested annual donation $12.96