On Fri, Jul 24, 2009 at 5:30 PM, Randall<email@example.com> wrote:
> Not likely to hurt the capacitor (AC capacitors don't have polarity so
> there's no worry about hooking it up backwards). B If the motor doesn't
> most likely it will just pop the circuit breaker. B The main thing to watch
> for, IMO, is having it run backwards.
> However, you might want to chase down where the start switch or relay is
> check that it works. B It should kill the current through the start
> and winding once the motor is up to speed. B If it doesn't, the capacitor
> will soon fail again (if the motor doesn't overheat or pop the breaker).
There are capacitor run motors, as well. Where the start winding is
left attached. If i rember right, they don't get very big, though.
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list