With the Eezi-Bleed connected to the slave for reverse filling you leave the
cap off the m/c so you can see (tin reservoir) the clear golden liquid rise
up and know when to stop filling. As I recall the kit comes with a short
length of tubing which is just the right size to fit the slave nipple and
the short pipe on the underside of the Eezi-Bleed m/c cap. This cap is not
screwed on, hence the size is immaterial, it just dangles under the car.
----- Original Message -----
From: "David Councill" <dcouncil@imt.net>
To: "MG Digest" <mgs@autox.team.net>
Sent: Tuesday, April 23, 2002 12:07 AM
Subject: Re: Bleeding Clutch Cylinders
> Now if I got this straight - this Eezibleed hooks up to the nipple on the
> wheel cylinder and blows fluid back up to the reservoir? And the cap has
to
> be sealed tight? What about the back pressure? Or does it go the other
way?
> Do I also need the Eezibleed multi-purpose reservoir cap or are the caps
> sufficient on the master and clutch master cylinders? Or am I all wrong
here?
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|