Someone suggested jacking up the right side of the car and then bleeding
it - don't remember if this was for an A or a B or both. Haven't had to try
it yet so don't know if it works or not.
Rick
--------- http://www.mgcars.org.uk/mgcouncil
--------- http://mywebpages.comcast.net/brown409/
--------- http://www.geocities.com/enymgaclub
----- Original Message -----
From: "N" <twobees@sprynet.com>
To: "MG Digest" <mgs@autox.team.net>
Sent: Saturday, April 20, 2002 1:06 PM
Subject: Bleeding Clutch Cylinders
> When I replaced my slave cylinder a year or two ago, I had the typical
> trouble - no matter how much I bled, the system still had air. Someone on
> this Digest had the solution. And, I don't remember what it is. I have
> checked the Archives. But, nothing there answers the question.
>
> Anyone have the exact solution. One of my MGB neighbors (There are 3 of
us
> within 2 blocks with blue CB roadsters) is having fits with his.
>
> Norm Sippel
> '66 MGB
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|