Having read of others problems I used a Gunsons EeziBleed on very low
pressure to fill the system from the slave nipple. Didn't need any pumping
or bleeding and I got the full (1/2" or so) travel right away.
----- Original Message -----
From: "N" <twobees@sprynet.com>
To: "MG Digest" <mgs@autox.team.net>
Sent: Saturday, April 20, 2002 6:06 PM
Subject: Bleeding Clutch Cylinders
> When I replaced my slave cylinder a year or two ago, I had the typical
> trouble - no matter how much I bled, the system still had air. Someone on
> this Digest had the solution. And, I don't remember what it is.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|