mg-t
[Top] [All Lists]

brake lights staying on

To: <mg-t@autox.team.net>
Subject: brake lights staying on
From: "Douglas Ormrod" <Douglas.Ormrod@neurological.org.nz>
Date: Thu, 4 Jan 2007 20:01:59 +1300
Hi T people

Got my TD engine back in and it appears to be retaining its oil this time. Now
getting it ready for its Warrent of Fitness (NZ road worthiness test). Odd
little problem with the brake lights - they come on OK - but take a while to
go off again - some minutes. I am guessing there is a pressure release
problem. All the cylinders were reconditioned some years ago - including
master cylinder and I renewed all the brake lines and switched to silicone.
The brake switch is original - or at least it came with the car.

Any suggestions for where I should start - master clyinder or switch - or
something else? The brakes seem to work OK - and don't appear to be binding.

Thnaks as always

Douglas

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t

<Prev in Thread] Current Thread [Next in Thread>