I tried switching from the clutch rod to the clutch cable on my '52 TD. The
car originally had a cable but somewhere along the line had the rod
installed. I bought the Moss 331-070 cable and found that it is so heavy and
stiff that the spring can't return the pedal to the engaged position. It was
difficult to bend the cable to make the offset from the pedal box to the oil
pan bracket. Has anyone run into this problem? Is there a solution?
Bob Donahue (Still stuck in the '50s)
EMAIL - BOBMGT@AOL.COM
52 MGTD - under DIY restoration NEMGTR #11470
71 MGB - AMGBA #96-12029, NAMGBR #7-3336
|