Re: [Fot] Never be beaten by equipment

[billdentin@aol.com]

<<< we use old OEM liners and bore to size with a fixture replicated from
John
eere production fixtures.  OEM material is very good and equipment for boring
and honing is state of the
rt. our torque plate is for sale.  we defer to Glen's methods, however, as we
suspect he has control over the
ariables and has great credibility.  but we cant afford to send our engines to
Glen.....or we would. >>>
We too have a stash of original sleeves that we dress for fresh engines.  They
are hard as all get out,
and much better than what we have seen available new.  Also...you can look for
Pink Pigs flying any day
when we disagree with that 'Bearded Wonder' down in Florida.
Hi Glen!
Bill Dentinger
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Unsubscribe: 
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net