1974-78, 260Z with 162 hp and FS5C71B 5-speed.
Up to -73, 240Z with 150 hp and FS5C71A or B 5-speed.
No flat top SU, no air pump.
datsunmike wrote:
> Tom,
>
> Your 260s are our 280s at least by model year.
>
> FWIW folks, Europe never received the 280, they only received the 260 up
> until 78 complete with the small bumpers and those funny front turn signals.
>
> Mike
> ----- Original Message -----
> From: "Thomas <*v*> Sweden" <csp311@telia.com>
> To: <datsun-roadsters@autox.team.net>
> Sent: Thursday, April 26, 2001 1:38 PM
> Subject: Re: wheels that will fit
>
> > 40300-N3200 = 260 Z standard alloy wheel for Europe.
> > 4-spoke 5.5 x 14" offset 15 mm
> >
> >
> > Tony Genovese wrote:
> >
> > > Hi guys and gals,
> > >
> >
> >
> >
> > > But remember, there are factory alloy wheels floating around that came
> on
> > > early generation 280Zs--these will work, but they are only 14" wheels. I
> > > don't know the width, but I'd suspect it's 4.5" or 5".
> > > And remember, the very first 300ZXs were four lug and had those
> distinctive
> > > flat face wheels which also will fit, but the lugs will have to be
> switched.
> > > Switching the lugs is A LOT of work, BTW.
> > > Tony
> > > 67.5 1600 w/U20 & Mikunis
> > > San Diego, CA
> > > _________________________________________________________________
--
<><><><><><><><><><><>
Thomas in Sweden
Nissan Silvia 1965 x2
http://csp311.cjb.net
http://silvia.nu.st
|