Tom,
Your 260s are our 280s at least by model year.
FWIW folks, Europe never received the 280, they only received the 260 up
until 78 complete with the small bumpers and those funny front turn signals.
Mike
----- Original Message -----
From: "Thomas <*v*> Sweden" <csp311@telia.com>
To: <datsun-roadsters@autox.team.net>
Sent: Thursday, April 26, 2001 1:38 PM
Subject: Re: wheels that will fit
> 40300-N3200 = 260 Z standard alloy wheel for Europe.
> 4-spoke 5.5 x 14" offset 15 mm
>
>
> Tony Genovese wrote:
>
> > Hi guys and gals,
> >
>
>
>
> > But remember, there are factory alloy wheels floating around that came
on
> > early generation 280Zs--these will work, but they are only 14" wheels. I
> > don't know the width, but I'd suspect it's 4.5" or 5".
> > And remember, the very first 300ZXs were four lug and had those
distinctive
> > flat face wheels which also will fit, but the lugs will have to be
switched.
> > Switching the lugs is A LOT of work, BTW.
> > Tony
> > 67.5 1600 w/U20 & Mikunis
> > San Diego, CA
> > _________________________________________________________________
|