Mike,
I already have a new cig lighter. My problem was getting the old one
out, which I finally did. Next question. I need to touch up the
underplate and the console plate. There are some small rust spots on the
under slide plate I got. It looks like a dull silver grey finish is in
order unless somebody already touched mine up before. The ashtray cover
looks more like chrome. I thought I've heard Hammerite mentioned as the
paint to use, but I don't see a listing on their web site for US
distributors. Any suggestion out there for what works for a 69 2000?
Rustoleum?
69 SRL
NOWROC
Troutdale, OR
"datsunmike"
<datsunmike@n To: <jon_wissler@pngc.com>
yc.rr.com> cc:
Subject: Re: Cig Lighter Removal
Question
03/25/01
08:23 AM
Save your energy and go buy another lighter from an auto parts store.
They're cheap. Use the original pull out thingie.
----- Original Message -----
From: <jon_wissler@pngc.com>
To: <datsun-roadsters@autox.team.net>
Sent: Sunday, March 25, 2001 10:15 AM
Subject: Cig Lighter Removal Question
> Help! I'm finally getting around to refurbishing the cigarette lighter
> assembly and slide plate rack I got. Question? How the heck does the
> lighter assembly come off the plate? Is the lighter assembly itself two
> pieces? I took the nuts off the bottom and was able to remove some of
the
> rusted innards, but the canister assembly underneath the plate is still
> attached, and there is a chrome flange that fits on the top side of the
> plate that protrudes beyond the circumference of the plate opening.
What's
> the secret. This is on a 69 2000 by the way.
>
> 69 SRL
> NOWROC
> Troutdale, OR
|