alpines
[Top] [All Lists]

Re: [Alpines] Weber question

To: rwvose@vcn.com, alpines@autox.team.net
Subject: Re: [Alpines] Weber question
From: jacranwell@aol.com
Date: Mon, 13 Jul 2009 12:05:32 -0400
Thanks Rich,

I may try those settings myself, as my idle could be better.

Any clues as to the main jests for the 1725?

Julian.


-----Original Message-----
From: rwvose@vcn.com
To: alpines@autox.team.net
Sent: Wed, 8 Jul 2009 20:46
Subject: [Alpines] Weber question


Hi Bill,?
You have the classic symptoms of DGV lean idles. I can't give you specific 
recommendations on jets, but if your 1725cc engine is basically stock and your 
altitude is between sea level and 2000', I'd start with a primary idle size of 
065 or 070 and the secondary idle of 062 or 065. Jets can be purchased from 
Pierce Manifolds or Redline Weber.?
?
Hope this helps,?
?
Rich Vose?
_______________________________________________?
Support Team.Net http://www.team.net/donate.html?
?
Alpines@autox.team.net?
http://autox.team.net/mailman/listinfo/alpines?
?
http://www.team.net/archive?


________________________________________________________________________
AOL Email goes Mobile! You can now read your AOL Emails whilst on the move. 
Sign up for a free AOL Email account with unlimited storage today.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Alpines@autox.team.net
http://autox.team.net/mailman/listinfo/alpines

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>