alpines
[Top] [All Lists]

[Alpines] Weber question

To: alpines@autox.team.net
Subject: [Alpines] Weber question
From: rwvose@vcn.com
Date: Wed, 08 Jul 2009 13:46:22 -0600
Hi Bill,
You have the classic symptoms of DGV lean idles. I can't give you  
specific recommendations on jets, but if your 1725cc engine is  
basically stock and your altitude is between sea level and 2000', I'd  
start with a primary idle size of 065 or 070 and the secondary idle of  
062 or 065. Jets can be purchased from Pierce Manifolds or Redline  
Weber.

Hope this helps,

Rich Vose
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Alpines@autox.team.net
http://autox.team.net/mailman/listinfo/alpines

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>