Hey thanks, Bob! I'll give that a try. I assume there's enough upper column
length to allow for that change of position....
Dave
---- Robert Lang <lang@isis.mit.edu> wrote:
> Hi,
>
> The "gap" can be filled in a couple of ways. The easiest is to loosen the
> sterring column clamps under the dash and slide the column towards the
> mouting hub for the wheel.
>
> It's pretty straight-forward.
>
> I had the same problem with the Grant wheel I use on both cars as that
> need an adapter too.
>
> regards,
> rml
> ---------------------------------------------------------------------------
> Bob Lang NER/SCCA | This space for rent
> Solo Chair 2008 TR6 40 F Prepared | Triumph!
> Voice:781-438-2568 FAX: 617-258-9535 | Cell: 339-927-4489
> ---------------------------------------------------------------------------
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|