Dick,
My Bentley manual shows the same thing, but my cap doesn't match (imagine
that!). I just wanted to make sure that I wasn't missing something obvious
like the cap was threaded on the inside or there was some other means unseen
holding the cap in place.
Thanks,
John
In a message dated 09/23/2001 11:45:22 PM Eastern Daylight Time,
tr6taylor@webtv.net writes:
> John---Your gear shift cap must be different than mine, which is like
> the one as illustrated in 37.17. 04 in the TR6 Repair Manual. (The
> Bentley may be the same) If you have either of these handy, this is what
> I was refering to. Either way, when you remove the top cover, you'll
> get a better look at the bottom side of this cap.
>
> Dick T.
> '73
|