[TR] 58 TR3a steering removal

[dave northrup]

Its actually pretty easy if you don't make one mistake - the little compression fitting on the end of the stator tube will stop you from pulling it up and out if you don't remove it!!!  we pushed the tube back out, saw the fitting, removed it, and out came the stator tube

The body is now off the frame and we are moving towards paint prep on both.

Having trouble with some of the captive nuts spinning; i.e. the captive nuts are no longer "captive."  Any advice there?

From: dave northrup
Sent: Wednesday, December 10, 2025 4:14 PM
To: triumphs at autox.team.net
Subject: 58 TR3a steering removal

I need to remove the stator tube, steering wheel, and worm gear on a 58 TR3a

Are there instructions anywhere?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20251214/27da5e92/attachment.htm>