[TR] TR3A hood rattle woes
don.hiscock at gmail.com
Sun Nov 1 10:14:08 MST 2020
Have you tried isolating the prop rod by putting o-rings or rubber/plastic
washers in its mount? That's a common source of bonnet rattle.
On Sun, Nov 1, 2020 at 9:15 AM Jim Henningsen <trguy75 at gmail.com> wrote:
> Ok, have had a bit of a challenge getting rid of a rattle at front of the
> hood on the 3A. I can't tell if it is the dzuz fasteners on the sides or
> the main striker in the middle. I put a rubber cap on the striker shaft
> that helped, but then it came back. Any ideas? Do the side fasteners need
> a thin rubber washer between the hood and fastener underneath?
> Any ideas appreciated.
> Rattles in Ocala
> Jim Henningsen
> ** triumphs at autox.team.net **
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Triumphs