<div dir="ltr">Have you tried isolating the prop rod by putting o-rings or rubber/plastic washers in its mount?  That's a common source of bonnet rattle.<div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Nov 1, 2020 at 9:15 AM Jim Henningsen <<a href="mailto:trguy75@gmail.com">trguy75@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Ok, have had a bit of a challenge getting rid of a rattle at front of the<br>
hood on the 3A.  I can't tell if it is the dzuz fasteners on the sides or<br>
the main striker in the middle.  I put a rubber cap on the striker shaft and<br>
that helped, but then it came back.  Any ideas?  Do the side fasteners need<br>
a thin rubber washer between the hood and fastener underneath?<br>
Any ideas appreciated.<br>
Rattles in Ocala<br>
Jim Henningsen<br>
<br>
<br>
** <a href="mailto:triumphs@autox.team.net" target="_blank">triumphs@autox.team.net</a> **<br>
<br>
Donate: <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Archive: <a href="http://www.team.net/pipermail/triumphs" rel="noreferrer" target="_blank">http://www.team.net/pipermail/triumphs</a>  <a href="http://www.team.net/archive" rel="noreferrer" target="_blank">http://www.team.net/archive</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com</a><br>
</blockquote></div>