[TR] TR3A Brake Bleeding Woes

dave dave at ranteer.com
Mon Nov 18 15:43:58 MST 2019

And I had a clutch  slave cylinder that was bad out of the box


From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of Frank Fisher
Sent: Monday, November 18, 2019 4:18 PM
To: 'Triumphs' <triumphs at autox.team.net>; Kinderlehrer <kinderlehrer at comcast.net>
Subject: Re: [TR] TR3A Brake Bleeding Woes


my buddies and i have had 2 new master cylinders that where bad straight from the supplier.


dont give up just yet, 


but just sayin






On Monday, November 18, 2019, 01:53:12 PM PST, Kinderlehrer <kinderlehrer at comcast.net <mailto:kinderlehrer at comcast.net> > wrote: 



I replaced the master cylinder in my TR3A and now I can't seem to get the brakes bled. I've been around all 4 wheels a few times but I continue to get bubbles and a soft peddle to a point. The peddle will get hard a few inches from the floor and will pump up somewhat. Is it possible that the new master cylinder is bad? I can't see how air is getting in the system, I know I've pulled several reservoirs worth of fluid through.

Thanks for any ideas,

** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  <http://www.team.net/pipermail/triumphs%20> http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20191118/4146c308/attachment.htm>

More information about the Triumphs mailing list