[TR] TR3A Brake Bleeding Woes

[Kinderlehrer]

Thanks Frank. They either come from China or India, don’t know which is worse.

Bob

 

From: Frank Fisher [mailto:yellowtr3 at yahoo.com] 
Sent: Monday, November 18, 2019 2:18 PM
To: 'Triumphs'; Kinderlehrer
Subject: Re: [TR] TR3A Brake Bleeding Woes

 

my buddies and i have had 2 new master cylinders that where bad straight from the supplier.

 

dont give up just yet, 

 

but just sayin

 

frank

 

 

 

On Monday, November 18, 2019, 01:53:12 PM PST, Kinderlehrer <kinderlehrer at comcast.net> wrote: 

 

 

I replaced the master cylinder in my TR3A and now I can't seem to get the brakes bled. I've been around all 4 wheels a few times but I continue to get bubbles and a soft peddle to a point. The peddle will get hard a few inches from the floor and will pump up somewhat. Is it possible that the new master cylinder is bad? I can't see how air is getting in the system, I know I've pulled several reservoirs worth of fluid through.

Thanks for any ideas,
Bob



** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  <http://www.team.net/pipermail/triumphs%20> http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20191118/8e934630/attachment.htm>