[TR] TR3A Brake Bleeding Woes
wbeech at flash.net
Mon Nov 18 15:22:22 MST 2019
You may already know this but I learned recently that you should always have you drain bottle above the cylinder outlet to prevent bubbles from entering through the bleeder threads.
Only other suggestion is to revisit the brake adjustments so the system is not using that first pedal pump just get the shoes started out.
Hopefully more good suggestions will follow.
All the best,
Cactus Jack drinks coffee black......MMM
> On Nov 18, 2019, at 3:53 PM, Kinderlehrer <kinderlehrer at comcast.net> wrote:
I replaced the master cylinder in my TR3A and now I can't seem to get the brakes bled. I've been around all 4 wheels a few times but I continue to get bubbles and a soft peddle to a point. The peddle will get hard a few inches from the floor and will pump up somewhat. Is it possible that the new master cylinder is bad? I can't see how air is getting in the system, I know I've pulled several reservoirs worth of fluid through.
Thanks for any ideas,
** triumphs at autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
More information about the Triumphs