[TR] Pilot bush TR3A
James Henningsen
trguy75 at gmail.com
Sat Nov 25 14:19:20 MST 2017
It’s in the freezer now. Fingers crossed. Thanks. Jim
Sent from my iPhone
> On Nov 25, 2017, at 9:57 AM, TERRY SMITH <terryrs at comcast.net> wrote:
>
> Hi, Jim. I've had success putting the bush in the freezer for half hour, then installing after heating the flywheel with a little propane flame.
>
>
>
> Good luck!
>
> Terry
>
>> On November 25, 2017 at 9:34 AM James Henningsen wrote:
>>
>>
>> My new pilot bush for crank does not fit in easily. I remember doing this in my TR6 motor and no issues. Is there a technique to use to get bush in without damaging opening or bush?
>> Thanks
>> Jim Henningsen
>> Ocala FL.
>>
>> Sent from my iPhone
>>
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/terryrs@comcast.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171125/58c5a149/attachment.html>
More information about the Triumphs
mailing list