[TR] tr3a belt
Geo Hahn
ahwahneetr at gmail.com
Sun Apr 2 10:08:40 MDT 2017
I suppose it depends on what pulley is used on the alternator -- that belt
is ¾" wide which is likely wide enough to work well on stock TR pulleys but
would probably be too wide to do well on an alternator that is expecting
a narrower belt.
But - I haven't tried anything like that.
Geo
On Sun, Apr 2, 2017 at 8:23 AM, David Templeton <davidt at opentext.com> wrote:
> So I have the original looking ( it was new ) belt, the thick solid belt
> installed on the ‘3. I was watching a couple of generator to alternator
> videos and in one they replaced the stock type belt with one of these.
>
>
>
> https://www.napaonline.com/en/p/NBG2524379
>
>
>
> Has anyone done this? I am not wanting to go whole hog and do the narrow
> belt replacement
>
>
>
> Regards
>
> David
>
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/triumphs/ahwahneetr at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170402/715d57e0/attachment.html>
More information about the Triumphs
mailing list