[TR] Pulling TR3 Hubs
Jonas Payne
jpaynepbr at cox.net
Fri Dec 30 08:47:48 MST 2016
Once you undo the big nut, a couple of taps with a dead blow hammer should be more than adequate, if it even takes that much effort.
Jonas Payne
PBR Consulting Services, LLC
702.882.6711
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of David Friedlander
Sent: Thursday, December 29, 2016 5:50 PM
To: TR3 Triumphs <triumphs at autox.team.net>; New England Triumphs <net at newenglandtriumphs.org>
Subject: [TR] Pulling TR3 Hubs
Hey all ~
Happy almost New Year everyone!
I need to pull the front hubs on the TR3. I'm sure many of you
have BTDT. Can you tell me if any of these Harbor Freight pullers
will do the job?
http://www.harborfreight.com/catalogsearch/result?q=Hub+puller
I'd prefer not to the $$ on a hydraulic puller and would like to think
one of the three-jaw designs would do the job.
Thanks in advance for any feedback...
Dave Friedlander
'59 TR3A, in process
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20161230/e86d9837/attachment.html>
More information about the Triumphs
mailing list