[TR] TR2/3 A type OD question

Pete Arakelian arakelianp at mossmotors.com
Wed Sep 2 12:23:30 MDT 2015

< Trying to get my OD to stop dripping from the large brass drain plug.

Hylomar is a good suggestion, but on threaded plugs I use Permatex 2B, non-hardening.  Put a little bead around the base of the plug and screw it in - no leaks.  I have used it on drain plugs, O-rings, etc. Of course this assumes there is no real severe distortion or other problem.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150902/f36c5da8/attachment.html>

More information about the Triumphs mailing list