[Tigers] Mk II wire diagram

[Ron Fraser]

Mayf

                Yes, it looks confusing to me also but I do understand that
the blower can get power from the B post of the voltage stabilizer.  It just
seems strange that they moved from getting power at the #4 post of the
ignition switch.  Basically, I don't want to get behind my friends Mk II
dash and go - WHAT THE?

 

My hope is that a Mk II owner would check the wire colors, locations at the
switch to verify what the real wire diagram is all the way to the blower
since the diagram in the Shop Manuel is a lot vague.

 

Ron Fraser

 

From: Larry Mayfield [mailto:drmayf at mayfco.com] 
Sent: Saturday, September 24, 2016 7:56 PM
To: 'Ron Fraser' <rfraser at bluefrog.com>
Subject: RE: [Tigers] Mk II wire diagram

 

I see the confusion. The green wire going to the voltage stabilizer is input
power to both the stabilizer AND the blower motor. Just a convenient take
off location.  That green wire goes to the #4 position on the fuse panel
which is powered by a white wire going to the 6RA relay (terminal W2) which
is powered by the Green wire (C2) coming from the ignition switch (4).
Tortured pathway, but functional only with the key turned on, I think.  See
the diagram in a real shop manual.

 

mayf

 

From: Tigers [mailto:tigers-bounces at autox.team.net] On Behalf Of Ron Fraser
via Tigers
Sent: Saturday, September 24, 2016 10:08 AM
To: tigers at Autox.Team.Net <mailto:tigers at Autox.Team.Net> 
Subject: [Tigers] Mk II wire diagram

 

                I recently noticed the on the Mk II wire diagram the heater
switch is not depicted very well.

 

It shows a G wire from the Voltage stabilizer to the switch, this is the 12
v to the switch.   

 

This is different from the Mk I, the heater switch gets power from the
ignition switch, lug #4.

On my Mk I there are 2 wires from the switch to the blower motor, G wire on
lug #6, low speed, B wire on lug #8, high speed.

 

Does the Mk II get power from the Voltage stabilizer B post on that G wire
or something else?

What color are the wires to the blower motor.

 

Just curious

Thanks 

Ron Fraser

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20160925/e5c0f6a6/attachment.html>