[Healeys] Clutch slave cylinder

[David Nock]

You need to be careful and not mix up the combinations of clutch cover and release bearings. The earlier covers require a taller release bearing.


David Nock
healeydoc at sbcglobal.net
209 948 8767
www.britishcarspecialists.com

Help us have our Founder Norman Nock inducteed into the 
British Sportscar Hall of Fame, You can vote for your favorites 
by visiting the site at.
www.britishsportscarhalloffame.org


From: Patrick & Caroline Quinn 
Sent: Sunday, January 19, 2020 10:04 PM
To: 'Bruce Peters' 
Cc: healeys at autox.team.net 
Subject: Re: [Healeys] Clutch slave cylinder

Hello 

 

Many years back I installed a BJ8 clutch into the BN3 and found that I couldn’t select any gear.

 

After a lot of hear scratching I figured out that the BJ8 clutch doesn’t stand proud of the flywheel as much as the earlier units. The simple solution was lengthening the slave cylinder pushrod and it all worked perfectly.

 

Hoo Roo

 

Patrick Quinn

Blue Mountains, Australia

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bruce Peters
Sent: Monday, 20 January 2020 3:20 PM
To: Michael Salter; Perry Small
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Clutch slave cylinder

 

Thanks Michael and Perry,

After some investigation today we determined we just couldn’t get enough travel with the current rod length on the slave. We mocked up a longer rod and everything functioned well, so my buddy Greg Wold (who says hi Michael) who was helping me has some spares that he can match up and send to me. 

 

Bruce

Sent from my iPad



--------------------------------------------------------------------------------
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200120/8745b997/attachment.htm>