[Healeys] Clutch slave cylinder

[Patrick & Caroline Quinn]

Hello 

 

Many years back I installed a BJ8 clutch into the BN3 and found that I couldn’t select any gear.

 

After a lot of hear scratching I figured out that the BJ8 clutch doesn’t stand proud of the flywheel as much as the earlier units. The simple solution was lengthening the slave cylinder pushrod and it all worked perfectly.

 

Hoo Roo

 

Patrick Quinn

Blue Mountains, Australia

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bruce Peters
Sent: Monday, 20 January 2020 3:20 PM
To: Michael Salter; Perry Small
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Clutch slave cylinder

 

Thanks Michael and Perry,

After some investigation today we determined we just couldn’t get enough travel with the current rod length on the slave. We mocked up a longer rod and everything functioned well, so my buddy Greg Wold (who says hi Michael) who was helping me has some spares that he can match up and send to me. 

 

Bruce

Sent from my iPad

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200120/89e6f316/attachment.htm>