[Healeys] Clutch and brake pedal issue

[Bob Spidell]

Well, did you get a good pedal?

bs

On 2/20/2019 3:09 PM, Tom Felts wrote:
> Please disregard this message below--I have figured it out. I had to 
> bleed the masters first before any fluid would come into them
> tom
>
> ----- Original Message -----
> From: Tom Felts <tomfelts at windstream.net>
> To: healeys at autox.team.net
> Sent: Wed, 20 Feb 2019 17:45:32 -0500 (EST)
> Subject: Clutch and brake pedal issue
>
> OK---so, I have replaced the clutch master and slave with new units 
> from HS.  I have looked at the brake master and it is clean as a pin.  
> All lines to both systems are tight and there is new fluid in the 
> cannister.
>
> Pumping the brake and clutch pedals as much as I can  i can build up 
> no pressure at all in either.  I had filled the cannister before 
> starting----and---I see no decrease in fluid level in it after pumping 
> the pedals.
>
> Is it possible that the cannister is clogged up and won't let fluid 
> get to the masters?  Other that that, I'm stumped as to why I can 
> build up no resistance in either system.
>
> Any thoughts?
>
> thanks
> tom
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190220/419cd487/attachment.html>