[Healeys] Clutch and brake pedal issue

[Tom Felts]

Please disregard this message below--I have figured it out.  I had to bleed the masters first before any fluid would come into themtom
----- Original Message -----
From: Tom Felts <tomfelts at windstream.net>
To: healeys at autox.team.net
Sent: Wed, 20 Feb 2019 17:45:32 -0500 (EST)
Subject: Clutch and brake pedal issue

 body {height: 100%; color:#000000; font-size:12pt; font-family:arial, helvetica, sans-serif;}OK---so, I have replaced the clutch master and slave with new units from HS.  I have looked at the brake master and it is clean as a pin.  All lines to both systems are tight and there is new fluid in the cannister.
Pumping the brake and clutch pedals as much as I can  i can build up no pressure at all in either.  I had filled the cannister before starting----and---I see no decrease in fluid level in it after pumping the pedals.
Is it possible that the cannister is clogged up and won't let fluid get to the masters?  Other that that, I'm stumped as to why I can build up no resistance in either system.
Any thoughts?
thankstom
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190220/d48d38ea/attachment.html>